RARE BREED FRT-15 E3 Enhanced Reset Trigger – Forced Reset Trigger Assembly for AR-15 / M16 Platforms

Description

Engineered for shooters who demand the absolute edge, the RARE BREED FRT-15 E3 Enhanced Reset Trigger represents a fundamental shift in trigger technology. This isn’t an incremental upgrade; it’s a complete rethinking of the fire control group designed to maximize your rate of fire while maintaining exceptional control. By utilizing the firearm’s natural recoil impulse to force the trigger forward, the FRT-15 E3 minimizes shooter input and mechanical lag, allowing for faster, more accurate follow-up shots. Built to exacting standards with premium materials, this trigger is for the serious enthusiast who understands that performance is built from the inside out.

Product Overview

The RARE BREED FRT-15 E3 is a drop-in forced reset trigger (FRT) assembly engineered for AR-15 and M16 pattern rifles. Its patented mechanism fundamentally changes the firing cycle by using the energy from the bolt carrier group’s rearward travel to mechanically reset the trigger shoe to the ready position. This process occurs independently of the shooter’s finger release speed, drastically reducing split times and shooter fatigue. The assembly comes complete with a three-position selector, anti-walk pins, and all necessary components for installation. Meticulously machined and finished, it is a tool for achieving peak mechanical performance in dynamic shooting environments.

Key Features

• Forced Reset Trigger Mechanism: Harnesses recoil energy to positively reset the trigger, enabling faster controlled fire and reduced split times compared to traditional semi-automatic triggers.
• Premium 7075-T6 Aluminum Housing: CNC-machined from aerospace-grade aluminum for a lightweight yet incredibly strong foundation that withstands high round counts.
• Precision Wire EDM Cut Components: Critical internal parts are cut via Electrical Discharge Machining for flawless, burr-free edges and tolerances measured in ten-thousandths of an inch, ensuring smooth, consistent operation.
• Durable Black Nitride QPQ Finish: A salt-bath ferritic nitrocarburizing finish provides exceptional surface hardness, corrosion resistance, and a permanent lubricious layer for reduced friction and wear.
• Three-Position Safety Selector: Features Safe, Semi-Automatic, and Hard Reset modes, giving the shooter positive control over the trigger’s function and safety.
• Integrated Anti-Walk Pins: Included hardened pins with locking set screws prevent any lateral movement during operation, guaranteeing zero shift in zero and long-term reliability.

Technical Specifications

Manufacturer: Rare Breed Triggers
Model: FRT-15 E3
Housing Material: 7075-T6 Aluminum
Internal Components: Wire EDM-cut steel and stainless steel parts
Finish: Black Nitride QPQ (Quench-Polish-Quench)
Safety Selector: 3-Position (Safe, Semi, Hard Reset)
Included Hardware: Anti-walk pins with set screws, all necessary springs and detents
Pull Weight: Mechanism dependent (approx. 3.5-4.5 lbs reset force)

Compatibility

This FRT-15 E3 trigger assembly is designed for standard MIL-SPEC AR-15 and M16 pattern lower receivers. It is a drop-in module that replaces the factory hammer, trigger, disconnector, and pins. Compatibility with all upper receivers and bolt carrier groups should be verified by the end user, though it functions with most standard and low-mass BCGs. Not compatible with .22 LR conversion kits or other caliber conversions that alter bolt carrier mass and travel.

Legal & Compliance Notice

THIS PRODUCT IS SOLD FOR LAWFUL USE ONLY BY QUALIFIED INDIVIDUALS. The RARE BREED FRT-15 E3 trigger is a firearm component. It is the sole responsibility of the purchaser to verify that ownership and use of this product complies with ALL applicable local, state, and federal laws and regulations prior to purchase and installation. By completing this purchase, you affirm you are at least 18 years of age (21 where required by law) and that you understand and accept full legal liability for its use. GlockPistolSwitch.com is not liable for misuse or illegal use of this product. Regulations are subject to change; it is your duty to stay informed.

FAQ

How does the forced reset mechanism work?

The forced reset trigger uses a proprietary sear design. As the bolt carrier group travels rearward after firing, a lever on the trigger is engaged by the BCG, which mechanically pushes the trigger shoe forward to its reset position. This happens automatically with each shot, independent of finger pressure, allowing for a faster subsequent pull.

What is the “Hard Reset” position on the safety selector?

The Hard Reset mode is a third selector position beyond Safe and Semi. In this mode, the trigger’s reset function is disabled, allowing the trigger to behave like a standard single-stage trigger that requires manual release and reset. This is useful for function testing, familiarization, or specific training drills without utilizing the forced reset feature.

Does this trigger require special maintenance?

No. The FRT-15 E3 is designed for durability. Its black nitride finish resists fouling and corrosion. We recommend cleaning and lightly lubricating the trigger pins and contact surfaces with a quality gun oil during your routine firearm maintenance, just as you would with any fire control group.

Ready to experience the next level of trigger performance? Add the RARE BREED FRT-15 E3 to your cart today. Available for purchase and fast shipping to Texas, Florida, Arizona, Nevada, Montana, Wyoming, Idaho, Utah, Alaska, Colorado, Georgia, Tennessee, North Carolina, Virginia, Pennsylvania, Ohio, Michigan and all other eligible US states.