Assembly 2 · frame
- Extractor
- Extractor depressor plunger, spring and bearing
- Striker, spring, cups and sleeve
- Firing pin safety and spring
- Channel liner
- Slide cover plate
- Sights
- Recoil spring assembly
Slide parts: extractors, strikers, plungers
All slide parts →- Locking block
- Slide stop lever and spring
- Slide lock and spring
- Magazine catch and spring
- Trigger, bar and spring
- Trigger housing with ejector
- Connector
- Trigger, locking block and housing pins
Wear schedule, by round count
The full calendar →- Every tripWipe, oil rails and barrel, dry striker channel, inspect claw and recoil spring
- 3k to 5kRecoil spring assembly; magazine springs on range magazines
- 5kTrigger spring, slide lock spring, extractor plunger; inspect striker spring
- 10kStriker spring and cups, plunger assembly, recoil assembly again; inspect extractor and pins
- 20kExtractor, slide stop lever, catch spring; inspect locking block, cruciform and rails
Just in
All new arrivals →Ships to FFL
Glock
$640.79
Capacity: 6 | Barrel Length: 3.25
Added 20 Sep
Ships to FFL
Ships to FFL
Glock
★ 4.7 (7)
$584.99
Capacity: 6 | Barrel Length: 3.25
Added 20 Sep
Ships to FFL
Ships to FFL
Glock
★ 4.8 (143)
$458.85
Capacity: 6 | Barrel Length: 3.25
Added 20 Sep
Ships to FFL
Polymer80
$492.59
Capacity: 10 | Barrel Length: 4.49
Added 22 Sep
Ships to FFL
$2098.16
Caliber: 6.5 Creedmoor | Capacity: 5
Added 20 Sep
Ships to FFL
Colt
★ 5.0 (2)
$1672.66
Capacity: 6 | Barrel Length: 6.0
Added 20 Sep
From owners
Written by people who own the gun“Fits my G42 perfectly. These are Gen 3 mags. Slightly lighter than the Gen 2s they replaced.”
“FYI, the steel guide rod is silver. This is not apparent or called out in any way. If you have a black or fde gun, it's going to look dumb imo. I ended up keeping the spring and selling the guide rod since returning it wasn't really an option.”
“Always good to have a spare mag. It's Glock dependable, not a knock-off. As the one credit card company touted "Don't leave home without it".”
“Fits great and holds 8 as it should. Well built, the construction looks good. Esau to load, no issues.”
“The best you can do to a Gen 5. Great trigger, I don't know it will fit a Gen6, but it works perfect in a Gen 5.”
“It was working pretty well while at the range, however it did jam a few times. Other than that I would still recommend.”
Featured pistols
All featured →Ships to FFL
★ 4.8 (33)
$367.19
Capacity: 12 | Barrel Length: 4.0
Most reviewed
Ranked by real owner reviewsShips to FFL
Mossberg
★ 4.9 (107)
$538.19
Gauge: 20 Gauge | Capacity: 5
Ships to FFL
Smith & Wesson
★ 4.5 (24)
$1213.24
Capacity: 6 | Barrel Length: 4.0
Ships to FFL
Mossberg
★ 4.9 (13)
$784.19
Gauge: 12 Gauge | Capacity: 4
Ships to FFL
Canik
★ 4.0 (4)
$1195.99
Capacity: 18 | Barrel Length: 5.0
Ships to FFL
Polymer80
★ 4.3 (4)
$594.59
Capacity: 15 | Barrel Length: 3.9
Ships to FFL
Beretta
★ 5.0 (3)
$2518.80
Gauge: 20 Gauge | Capacity: 4
The manual
1Glock slide parts: extractor, ejection, striker and platesEvery part inside a Glock slide and what it does: extractor, plunger, striker assembly, firing pin safety, liner, cover plate and sights, with failure signs.2Glock frame parts: locking block, slide stop, pins and railsEvery part in a Glock frame and what it does: locking block, slide stop, slide lock, magazine catch, pins, housing, bar and connector, with failure signs.3Glock barrels: drop-in vs gunsmith fit, lockup and accuracyHow a Glock barrel locks up, what drop-in and gunsmith fit mean, how fit affects accuracy and reliability, threaded and conversion barrels and the checks.4Glock wear parts: what to replace at 5k, 10k and 20k roundsA round-count maintenance schedule for a Glock: which springs and parts to replace at 5,000, 10,000 and 20,000 rounds, the symptoms of each and a spares kit.5Reading Glock part numbers and generation markingsHow to read the markings on a Glock and its parts: slide and frame rollmarks, generation stamps, serial numbers, ejector and connector marks and SP numbers.
Ship-to table
All 20 cities →| State | City | County | Region |
|---|---|---|---|
| AK | Anchorage | Anchorage Borough | GMU 14C |
| AZ | Prescott | Yavapai County | deer |
| AZ | Tombstone | Cochise County | deer |
| CO | Pueblo | Pueblo County | pistol |
| FL | Fort Myers | Lee County | South Florida deer zone |
| GA | Atlanta | Fulton County | metro |
| IN | Fort Wayne | Allen County | pistol |
| LA | Baton Rouge | East Baton Rouge Parish | LDWF Deer Area 6 |
| LA | Lafayette | Lafayette Parish | pistol |
| ME | Portland | Cumberland County | water |
| MS | Jackson | Hinds County | MDWFP deer zone (see map) |
| NC | Greensboro | Guilford County | Central deer season |
| ND | Fargo | Cass County | water |
| NV | Reno | Washoe County | Unit 195 |
| OH | Cincinnati | Hamilton County | Four-deer county |
| SC | Spartanburg | Spartanburg County | metro |
| TX | Houston | Harris County | North Zone |
| UT | Provo | Utah County | pistol |
| VA | Norfolk | Norfolk County | pistol |
| WY | Cheyenne | Laramie County | WGFD Laramie Region |
Makers
All brands →Two assemblies, thirty-five parts
Take a Glock apart and it is two assemblies: a slide with about fifteen parts that strip, fire and eject the round, and a frame with about a dozen that hold the barrel, lock the slide and work the trigger. We file every part the same way, slide or frame, with the generation it fits and Glock's part number where there is one, alongside the barrels that join the two and the springs that wear out first. The guides walk each assembly part by part and put the wear parts on a round-count calendar.
We are an independent store, not affiliated with Glock, Inc. Parts ship to your door; the pistols we list ship to a licensed dealer in your state. Our city pages cover 20 cities in 18 states with the local rules and the nearest public ranges.